Phono Motor Mounts and Grommets


V-M Audio Enthusiasts has phono motor mounts for V-M and most other brands of record players and changers. These are fairly universal so it is OK to go by picture and height measurements.

Motor Mounts
Click on one of the links below for motor mounts used in many popular record changers and turntables:
VM2773
|
Top photo, shown in center - for older V-M, RCA and others (motor has straight mounting studs). |
VM36948
|
Top photo, shown at left - for newer V-M, RCA and others (motor has cone shaped mounting studs). |
VM42707
|
V-M Model 2100 chassis grommet that can substitute for Webcor mount in top photo, shown at right. |
MountM1
|
Same as above, but taller to replace certain Webcor and Magnavox motor mounts. |
MountM2
|
Same as above, but even taller to replace certain Garrard motor mounts. |

Grommets
Click on one of the links below for other grommets used in many popular record changers and turntables:
VM5040
|
Shift linkage grommet for older V-M, RCA and others with turret motor systems. |
VM9906
|
Chassis mounting grommet for 45 players. |
VM43055
|
Chassis mounting grommet for Voice of Music Model 323. |

Other Rubber Parts
Click on one of the links below for other rubber parts used in many popular record changers and turntables:
VM2580
|
Sensor button for 7 inch set down lever on V-M record changers. |
1412
|
Arm sleeve on Garrard RC80, RC90 and A series record changers. |
1413
|
Webcor velocity trip for many record player models. |
1419
|
Webcor index finger cushion for many record player models. |
1420
|
Admiral velocity trip for many record player models. |
|
® Registered trademarks licensed from V-M Corporation. Other
material copyright 2000-2013 by V-M Audio Enthusiasts. Website created by
|